| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| ABHP |
OVERALL LENGTH |
1.662 INCHES MAXIMUM |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES AND 1.125 INCHES |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
18-1 SINGLE MATING END |
| ABKW |
OVERALL HEIGHT |
1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM |
| AFRP |
INSERT POSITION IN DEG |
70.0 |
| AFQW |
MATING END QUANTITY |
1 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3412 GOVERNMENT STANDARD |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| AAJD |
THREAD CLASS |
2A AND 2A |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
250.0 SINGLE MATING END 2ND CONTACT GROUPING |
| CMLP |
THREAD QUANTITY PER INCH |
18 AND 18 |
| AWTN |
OPERATING TEMP RATING |
-55.0 DEG CELSIUS MINIMUM AND 200.0 DEG CELSIUS MAXIMUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| FEAT |
SPECIAL FEATURES |
16-22 WIRE SIZE PIN CONTACTS IN LIEU OF 16-16 |
| CQZG |
INSERT MATERIAL |
RUBBER SILICONE CLASS Q SINGLE MATING END |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| CXCG |
INCLUDED CONTACT QUANTITY |
6 SINGLE MATING END 2ND CONTACT GROUPING |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| AFRT |
SHELL TYPE |
SOLID |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.046 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL AND COUPLING FACILITY |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
4 SINGLE MATING END 1ST CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END ALL CONTACT GROUPINGS |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.046 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END ALL CONTACT GROUPINGS |
| CSPT |
SHELL MATERIAL |
ALUMINUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-5015 SPECIFICATION |
| CSWM |
SHELL SURFACE TREATMENT |
CHROMATE AND CADMIUM AND NICKEL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END 1ST CONTACT GROUPING |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
200.0 SINGLE MATING END 2ND CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF AND UNEF |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND SHOCK RESISTANT AND HEAT RESISTANT AND MOISTURE PROOF AND VIBRATION PROOF AND COLD RESISTANT AND EXPLOSION PROOF |
| AKMG |
NOMINAL THREAD LENGTH |
0.290 INCHES AND 0.625 INCHES |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END 1ST CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |