| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.878 INCHES MINIMUM AND 0.898 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
PLASTIC FLUOROSILICONE SINGLE MATING END |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.968 NOMINAL INCHES |
| AFQW |
MATING END QUANTITY |
1 |
| ABKW |
OVERALL HEIGHT |
1.238 INCHES MINIMUM AND 1.278 INCHES MAXIMUM |
| AFRP |
INSERT POSITION IN DEG |
80.0 AND 142.0 AND 196.0 AND 293.0 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-DTL-28840/12 GOVERNMENT SPECIFICATION |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-S-365 1ST TREATMENT RESPONSE CLEAR PRINTED VALUE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
1.238 INCHES MINIMUM AND 1.278 INCHES MAXIMUM |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-DTL-28840 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AKMG |
NOMINAL THREAD LENGTH |
0.625 INCHES |
| AFRT |
SHELL TYPE |
SOLID |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.021 SILVER GRAINS, TROY |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCG |
INCLUDED CONTACT QUANTITY |
21 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| CMLP |
THREAD QUANTITY PER INCH |
10 |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.968 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
AN/SRQ-4 |
| ABHP |
OVERALL LENGTH |
1.625 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
DOUBLE STUB |
| ADZC |
ENVIRONMENTAL PROTECTION |
VIBRATION RESISTANT AND CORROSION RESISTANT AND THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT |
| FEAT |
SPECIAL FEATURES |
INSERT ARRANGEMENT 15-1; ALSO 20-20 WIRE SIZE PIN IN LIEU 0F 20-22 |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
15-21 SINGLE MATING END |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |