| CMLP |
THREAD QUANTITY PER INCH |
24 |
| ABMK |
OVERALL WIDTH |
3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| CSCF |
TERMINAL TYPE |
SOLDER WELL ALL MATING ENDS SINGLE CONTACT GROUPING |
| CSLR |
GUIDE DESIGN AND LOCATION |
HEXAGON SHAPE MALE POST LEFT-HAND AT 5 OCLOCK |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
HUMIDITY RESISTANT AND THERMAL SHOCK RESISTANT AND SHOCK RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AFRV |
CONNECTOR LOCKING METHOD |
SCREW |
| CQTM |
TERMINAL LOCATION |
BACK ALL MATING ENDS SINGLE CONTACT GROUPING |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| ABKW |
OVERALL HEIGHT |
1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS OR 1288BX MFR REF SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CSLR |
GUIDE DESIGN AND LOCATION |
HEXAGON SHAPE MALE POST RIGHT-HAND AT 12 OCLOCK |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| ABHP |
OVERALL LENGTH |
1.700 INCHES MAXIMUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
40 ALL MATING ENDS |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD ALL MATING ENDS SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AFQW |
MATING END QUANTITY |
2 |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.436 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| CQZG |
INSERT MATERIAL |
PLASTIC DIALLYL PHTHALATE ALL MATING ENDS OR PLASTIC EPOXY ALL MATING ENDS |
| AAJD |
THREAD CLASS |
2B |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, FLUSH MOUNT |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
2.782 INCHES MAXIMUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.080 GOLD GRAINS, TROY |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE |
| AFRN |
POLARIZATION METHOD |
2 POLARIZATION POSTS |