| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| CMLP |
THREAD QUANTITY PER INCH |
28 AND 10 |
| AGAV |
END ITEM IDENTIFICATION |
4935-00-930-7250 TEST STATION,GUIDED MISSILE SYSTEM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY 6061 |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
NPT AND SPECIAL ACME |
| AAJD |
THREAD CLASS |
2A AND 2B |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND COLD RESISTANT AND VIBRATION RESISTANT |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
41.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRV |
CONNECTOR LOCKING METHOD |
INTERNALLY THREADED COUPLING RING |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL AND COUPLING FACILITY |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE III MIL SPEC SINGLE TREATMENT RESPONSE |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE |
| CSWM |
SHELL SURFACE TREATMENT |
ANODIZE |
| CXCG |
INCLUDED CONTACT QUANTITY |
37 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
2.084 INCHES MINIMUM AND 2.104 INCHES MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
2.084 INCHES MINIMUM AND 2.104 INCHES MAXIMUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
20-10 SINGLE MATING END |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE II,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
2.006 INCHES MINIMUM AND 2.026 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CQZG |
INSERT MATERIAL |
PLASTIC SILICONE SINGLE MATING END |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.185 GOLD GRAINS, TROY |
| CQJX |
NOMINAL THREAD SIZE |
2.094 INCHES AND 2.500 INCHES |
| AAJF |
THREAD DIRECTION |
LEFT-HAND AND RIGHT-HAND |