| CQTM |
TERMINAL LOCATION |
SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
| CQJX |
NOMINAL THREAD SIZE |
1.375 INCHES |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AFQW |
MATING END QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3408 GOVERNMENT STANDARD |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND MOISTURE PROOF AND VIBRATION PROOF |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.020 GOLD GRAINS, TROY |
| CQZG |
INSERT MATERIAL |
RUBBER SILICONE CLASS Q SINGLE MATING END |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRV |
CONNECTOR LOCKING METHOD |
INTERNALLY THREADED COUPLING RING |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AKFA |
DISTANCE FROM CENTERLINE TO CABLE END |
3.672 INCHES MINIMUM AND 3.688 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| ADMW |
BODY ANGLE IN DEG |
90.0 |
| AAQL |
BODY STYLE |
ANGLE SHAPE W/CABLE CLAMP |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
22-22 SINGLE MATING END |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
73.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-5015 SPECIFICATION |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
CABLE CLAMP |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2B |
| CXCG |
INCLUDED CONTACT QUANTITY |
4 SINGLE MATING END SINGLE CONTACT GROUPING |
| AKEZ |
DISTANCE FROM CENTERLINE TO CONNECTOR END |
2.984 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
| AFQJ |
CABLE ENTRANCE DIAMETER |
0.625 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
1.578 INCHES MINIMUM AND 1.594 INCHES MAXIMUM |