| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.151 INCHES MINIMUM AND 1.161 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| ABMK |
OVERALL WIDTH |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
14 ALL MATING ENDS SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
HEAT RESISTANT AND COLD RESISTANT AND MOISTURE PROOF AND VIBRATION PROOF AND SALT WATER RESISTANT AND SHOCK RESISTANT AND EXPLOSION PROOF |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL AND EXTERNALLY THREADED SHELL |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET 2ND MATING END SINGLE CONTACT GROUPING |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| ABHP |
OVERALL LENGTH |
2.020 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN 1ST MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
20-27 ALL MATING ENDS |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.028 SILVER GRAINS, TROY |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE W/FLANGE |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER ALL MATING ENDS SINGLE CONTACT GROUPING |
| CQJX |
NOMINAL THREAD SIZE |
1.250 INCHES |
| AAJD |
THREAD CLASS |
2A |
| AFQW |
MATING END QUANTITY |
2 |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFRP |
INSERT POSITION IN DEG |
35.0 AND 325.0 |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.151 INCHES MINIMUM AND 1.161 INCHES MAXIMUM |
| CQZG |
INSERT MATERIAL |
RUBBER ALL MATING ENDS |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |