| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| CQZG |
INSERT MATERIAL |
RUBBER SINGLE MATING END |
| AFQW |
MATING END QUANTITY |
1 |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY II,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| AAJD |
THREAD CLASS |
2A AND 2A |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CMLP |
THREAD QUANTITY PER INCH |
18 AND 18 |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| ABHP |
OVERALL LENGTH |
1.557 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
24-9 SINGLE MATING END |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.375 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
1.500 INCHES AND 1.375 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL AND COUPLING FACILITY |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065,CLASS RS OR SC MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE 2,CLASS II MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE PROOF AND VIBRATION PROOF AND COLD RESISTANT AND HEAT RESISTANT AND SHOCK RESISTANT AND SALT WATER RESISTANT AND EXPLOSION PROOF |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.375 INCHES NOMINAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.142 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.010 GOLD GRAINS, TROY |
| AWTN |
OPERATING TEMP RATING |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AGAV |
END ITEM IDENTIFICATION |
7010-01-017-7039 FIRE DIRECTION CENT |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCG |
INCLUDED CONTACT QUANTITY |
2 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
135.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AKMG |
NOMINAL THREAD LENGTH |
0.339 INCHES |
| ABKW |
OVERALL HEIGHT |
1.760 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.760 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF AND UNEF |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.812 INCHES MINIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |