| ABHP |
OVERALL LENGTH |
7.312 INCHES MAXIMUM |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.173 INCHES MAXIMUM |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END 2ND CONTACT GROUPING |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CQJX |
NOMINAL THREAD SIZE |
2.250 INCHES |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AFQW |
MATING END QUANTITY |
1 |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| ABKW |
OVERALL HEIGHT |
2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM |
| AFQJ |
CABLE ENTRANCE DIAMETER |
0.875 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| AWTN |
OPERATING TEMP RATING |
-55.0 DEG CELSIUS MINIMUM AND 175.0 DEG CELSIUS MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UN |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
36A66 SINGLE MATING END |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| CQZG |
INSERT MATERIAL |
RUBBER SILICONE CLASS Q SINGLE MATING END |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE AND NICKEL |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3400 GOVERNMENT STANDARD |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.072 GOLD GRAINS, TROY |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
4 SINGLE MATING END 1ST CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END ALL CONTACT GROUPINGS |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| AAJD |
THREAD CLASS |
2A |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END ALL CONTACT GROUPINGS |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE PROOF AND SHOCK RESISTANT AND VIBRATION PROOF AND HEAT RESISTANT AND COLD RESISTANT AND SALT WATER RESISTANT AND EXPLOSION PROOF |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-5015 SPECIFICATION |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
41.0 SINGLE MATING END 1ST CONTACT GROUPING |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
CABLE CLAMP |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
52 SINGLE MATING END 2ND CONTACT GROUPING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |