| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
32-64 SINGLE MATING END |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMPOSITION 260 OR COMPOSITION II FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE 1,GRADE A MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND MIL-G-45204,TYPE II,GRADE C,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND MIL-C-14550,CLASS 4 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AGAV |
END ITEM IDENTIFICATION |
SONAR AN/BQQ6 |
| ADZC |
ENVIRONMENTAL PROTECTION |
HEAT RESISTANT AND COLD RESISTANT AND SHOCK RESISTANT AND VIBRATION PROOF AND SALT WATER RESISTANT AND MOISTURE PROOF AND EXPLOSION PROOF |
| CQZG |
INSERT MATERIAL |
RUBBER CHLOROPRENE CLASS CR SINGLE MATING END |
| CXCG |
INCLUDED CONTACT QUANTITY |
54 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRP |
INSERT POSITION IN DEG |
80.0 |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| AKMG |
NOMINAL THREAD LENGTH |
0.625 INCHES |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
250.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| ABMK |
OVERALL WIDTH |
2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.461 INCHES MINIMUM AND 1.601 INCHES MAXIMUM |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-STD-417,GRADE SC715 MIL STD SINGLE MATERIAL RESPONSE SINGLE MATING END |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES |
| AWTN |
OPERATING TEMP RATING |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.054 GOLD GRAINS, TROY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.171 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
200.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY 380.0 |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |