| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.959 INCHES MINIMUM AND 0.979 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.662 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AFQW |
MATING END QUANTITY |
1 |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
16S-4 SINGLE MATING END |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.002 GOLD GRAINS, TROY |
| AXGY |
MOUNTING METHOD (NON-CORE) |
UNTHREADED HOLE |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT FINISH GOLD |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3402 GOVERNMENT STANDARD |
| AFRP |
INSERT POSITION IN DEG |
35.0 |
| AWTN |
OPERATING TEMP RATING |
-55.0 DEG CELSIUS MINIMUM AND 200.0 DEG CELSIUS MAXIMUM |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416, TYPE II, CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| CQZG |
INSERT MATERIAL |
RUBBER SILICONE CLASS Q SINGLE MATING END |
| AFRT |
SHELL TYPE |
SOLID |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK RESISTANT AND HEAT RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF AND COLD RESISTANT AND MOISTURE PROOF AND EXPLOSION PROOF |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| CSPT |
SHELL MATERIAL |
ALUMINUM |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES |
| ABKW |
OVERALL HEIGHT |
1.250 INCHES MINIMUM AND 1.312 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-5015 SPECIFICATION |
| ABMK |
OVERALL WIDTH |
1.250 INCHES MINIMUM AND 1.312 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
2 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204, TYPE 2, GRADE C, CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND QQ-N-290, CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CHROMATE AND CADMIUM AND NICKEL |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.959 INCHES MINIMUM AND 0.979 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |