| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
6 UNTHREADED HOLE SECOND MOUNTING FACILITY |
| AKDX |
WINDING QUANTITY |
1 |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
130.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING |
| CRPQ |
NOMINAL OPERATING CURRENT RATING AND TYPE |
100.0 MILLIAMPERES AC SINGLE WINDING |
| CRXH |
TIME DELAY |
0.05 SECONDS MAXIMUM FIXED RELEASE TIME |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
4 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| APCN |
COIL QUANTITY |
1 |
| CRXH |
TIME DELAY |
0.02 SECONDS MAXIMUM FIXED OPERATE TIME |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
17.0 AMPERES AC RESISTIVE LOAD AND 16.0 AMPERES DC RESISTIVE LOAD |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK RESISTANT AND HERMETIC AND VIBRATION RESISTANT |
| ABKW |
OVERALL HEIGHT |
2.540 INCHES NOMINAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.171 INCHES MINIMUM SECOND MOUNTING FACILITY AND 0.183 INCHES MAXIMUM SECOND MOUNTING FACILITY |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| AJSS |
FREQUENCY IN HERTZ |
60.0 NOMINAL OR 400.0 NOMINAL |
| ABMK |
OVERALL WIDTH |
2.270 INCHES NOMINAL |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.620 INCHES MINIMUM FIRST MOUNTING FACILITY AND 2.630 INCHES MAXIMUM FIRST MOUNTING FACILITY |
| CBME |
CUBIC MEASURE |
17.124 CUBIC INCHES |
| APNP |
DUTY TYPE |
CONTINUOUS |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR FIRST MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
2.970 INCHES NOMINAL |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
8.0 AMPERES AC MOTOR LOAD AND 8.0 AMPERES DC MOTOR LOAD |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
6 UNTHREADED HOLE FIRST MOUNTING FACILITY |
| ADTV |
CASE MATERIAL |
METAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
14 SCREW ALL FUNCTIONS |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.620 INCHES MINIMUM SECOND MOUNTING FACILITY AND 2.630 INCHES MAXIMUM SECOND MOUNTING FACILITY |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.171 INCHES MINIMUM FIRST MOUNTING FACILITY AND 0.183 INCHES MAXIMUM FIRST MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SECOND MOUNTING FACILITY |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
4.0 AMPERES AC LAMP LOAD AND 4.0 AMPERES DC LAMP LOAD |