| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES AC RESISTIVE LOAD AND 2.0 AMPERES DC RESISTIVE LOAD |
| AKDX |
WINDING QUANTITY |
1 |
| APNA |
WINDING DC RESISTANCE RATING |
450.0 OHMS MINIMUM SINGLE WINDING AND 550.0 OHMS MAXIMUM SINGLE WINDING |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
4 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| APCN |
COIL QUANTITY |
1 |
| ABHP |
OVERALL LENGTH |
1.415 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.810 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SECOND MOUNTING FACILITY |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES DC INDUCTIVE LOAD |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| CRXH |
TIME DELAY |
0.005 SECONDS MAXIMUM FIXED RELEASE TIME |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC AND SHOCK RESISTANT |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
GENERAL |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.195 INCHES MINIMUM SECOND MOUNTING FACILITY AND 1.205 INCHES MAXIMUM SECOND MOUNTING FACILITY |
| APNP |
DUTY TYPE |
CONTINUOUS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
14 PIN ALL FUNCTIONS |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.395 INCHES MINIMUM SECOND MOUNTING FACILITY AND 0.405 INCHES MAXIMUM SECOND MOUNTING FACILITY |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
13.5 VOLTS TEARDROP, TWO HOLES TYPE 4F SINGLE WINDING |
| ABMK |
OVERALL WIDTH |
0.610 INCHES MAXIMUM |
| CBME |
CUBIC MEASURE |
0.699 CUBIC INCHES |
| CRXH |
TIME DELAY |
0.006 SECONDS MAXIMUM FIXED OPERATE TIME |
| CRPQ |
NOMINAL OPERATING CURRENT RATING AND TYPE |
27.0 MILLIAMPERES DC SINGLE WINDING |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 PLUG-IN TERMINAL FIRST MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SECOND MOUNTING FACILITY |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.091 INCHES MINIMUM SECOND MOUNTING FACILITY AND 0.101 INCHES MAXIMUM SECOND MOUNTING FACILITY |