| AKDX |
WINDING QUANTITY |
1 |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.182 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.197 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CWGM |
AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES AC LAMP LOAD AND 1.0 AMPERES DC LAMP LOAD |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CSKP |
NONPILE-UP AUXILIARY CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY AND 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK PROOF AND VIBRATION PROOF |
| APCN |
COIL QUANTITY |
1 |
| CBBL |
FEATURES PROVIDED |
COIL VOLTAGE SUPPRESSION AND POLARIZED |
| CRXH |
TIME DELAY |
0.02 SECONDS MAXIMUM FIXED OPERATE TIME |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
25.0 AMPERES AC RESISTIVE LOAD |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
200.0 AC |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
3.200 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
19 THREADED STUD ALL FUNCTIONS |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
3 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| APNP |
DUTY TYPE |
CONTINUOUS |
| ZZZV |
FSC APPLICATION DATA (NON-CORE) |
ELECTRICAL SYSTEM,AIRCRAFT |
| CWGM |
AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
5.0 AMPERES AC RESISTIVE LOAD AND 5.0 AMPERES DC RESISTIVE LOAD |
| CSQC |
AUXILIARY CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.730 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| ABKW |
OVERALL HEIGHT |
3.780 INCHES NOMINAL |
| CRXH |
TIME DELAY |
0.01 SECONDS MAXIMUM FIXED RELEASE TIME |
| ABMK |
OVERALL WIDTH |
3.210 INCHES NOMINAL |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
28.0 VOLTS TEARDROP, TWO HOLES TYPE 4F SINGLE WINDING |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |