| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
25.0 AMPERES AC INDUCTIVE LOAD AND 25.0 AMPERES DC INDUCTIVE LOAD |
| AKDX |
WINDING QUANTITY |
1 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS24192 GOVERNMENT STANDARD |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 THREADED STUD ALL FUNCTIONS |
| ABHP |
OVERALL LENGTH |
3.062 INCHES MAXIMUM |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
25.0 AMPERES AC MOTOR LOAD AND 25.0 AMPERES DC MOTOR LOAD |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-6106 SPECIFICATION |
| APNA |
WINDING DC RESISTANCE RATING |
92.0 OHMS NOMINAL SINGLE WINDING |
| APCN |
COIL QUANTITY |
1 |
| CRXH |
TIME DELAY |
0.02 SECONDS MAXIMUM FIXED OPERATE TIME |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.125 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
25.0 AMPERES AC RESISTIVE LOAD AND 25.0 AMPERES DC RESISTIVE LOAD |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK RESISTANT |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.469 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
3 POLE, SINGLE THROW, NORMALLY OPEN, DOUBLE MAKE, MOMENTARY ACTION |
| APNP |
DUTY TYPE |
CONTINUOUS |
| ABKW |
OVERALL HEIGHT |
2.750 INCHES MAXIMUM |
| CBME |
CUBIC MEASURE |
23.256 CUBIC INCHES |
| ADTV |
CASE MATERIAL |
METAL |
| ABMK |
OVERALL WIDTH |
2.750 INCHES MAXIMUM |
| CRXH |
TIME DELAY |
0.01 SECONDS MAXIMUM FIXED RELEASE TIME |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.219 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |