| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
2.0 AMPERES AC LAMP LOAD AND 2.0 AMPERES DC LAMP LOAD |
| CBME |
CUBIC MEASURE |
1.285 CUBIC INCHES |
| AKDX |
WINDING QUANTITY |
1 |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
TERMINAL SURFACES GOLD |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
115.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CRXH |
TIME DELAY |
0.05 SECONDS MAXIMUM FIXED RELEASE TIME |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-6106 SPECIFICATION |
| APCN |
COIL QUANTITY |
1 |
| ABKW |
OVERALL HEIGHT |
1.425 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FAILURE RATE LEVEL 3.0 PERCENT PER 10,000 CYCLES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS27401 GOVERNMENT STANDARD |
| CBBL |
FEATURES PROVIDED |
POLARIZED |
| ABMK |
OVERALL WIDTH |
0.525 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.396 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
1.718 INCHES MAXIMUM |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
SPECIFIC |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
8.0 AMPERES AC INDUCTIVE LOAD AND 8.0 AMPERES DC INDUCTIVE LOAD |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
4.0 AMPERES AC MOTOR LOAD AND 4.0 AMPERES DC MOTOR LOAD |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 PIN ALL FUNCTIONS |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| APNP |
DUTY TYPE |
CONTINUOUS |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
10.0 AMPERES AC RESISTIVE LOAD AND 10.0 AMPERES DC RESISTIVE LOAD |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| ABTD |
MOUNTING SLOT WIDTH |
0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
IN-LINE SINGLE MOUNTING FACILITY |
| ADTV |
CASE MATERIAL |
METAL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| CRXH |
TIME DELAY |
0.015 SECONDS MAXIMUM FIXED OPERATE TIME |