| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES AC RESISTIVE LOAD AND 2.0 AMPERES DC RESISTIVE LOAD |
| AKDX |
WINDING QUANTITY |
1 |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.057 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.067 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 WIRE HOOK ALL FUNCTIONS |
| ABMK |
OVERALL WIDTH |
0.890 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| APCN |
COIL QUANTITY |
1 |
| CRXH |
TIME DELAY |
0.005 SECONDS MAXIMUM FIXED OPERATE TIME |
| APNA |
WINDING DC RESISTANCE RATING |
540.0 OHMS MINIMUM SINGLE WINDING AND 660.0 OHMS MAXIMUM SINGLE WINDING |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
26.5 VOLTS TEARDROP, TWO HOLES TYPE 4F SINGLE WINDING |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| ABHP |
OVERALL LENGTH |
1.320 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES DC INDUCTIVE LOAD |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.276 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.286 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CBME |
CUBIC MEASURE |
0.540 CUBIC INCHES |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
GENERAL |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| APNP |
DUTY TYPE |
CONTINUOUS |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CRXH |
TIME DELAY |
0.004 SECONDS MAXIMUM FIXED RELEASE TIME |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.125 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |