| AKDX |
WINDING QUANTITY |
1 |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
26.5 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
3.0 AMPERES AC RESISTIVE LOAD AND 10.0 AMPERES DC RESISTIVE LOAD |
| AGAV |
END ITEM IDENTIFICATION |
OQ290(V)2/MSM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 WIRE HOOK ALL FUNCTIONS |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.406 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| APCN |
COIL QUANTITY |
1 |
| ABMK |
OVERALL WIDTH |
1.612 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-5757/23 GOVERNMENT SPECIFICATION |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.120 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| ABKW |
OVERALL HEIGHT |
0.625 INCHES MAXIMUM |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| CBME |
CUBIC MEASURE |
1.642 CUBIC INCHES |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| APNA |
WINDING DC RESISTANCE RATING |
330.0 OHMS MAXIMUM SINGLE WINDING |
| ABHP |
OVERALL LENGTH |
1.630 INCHES MAXIMUM |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
500.0 MILLIAMPERES AC LAMP LOAD AND 1.0 AMPERES DC LAMP LOAD |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
SPECIFIC |
| CRXH |
TIME DELAY |
0.015 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| APNP |
DUTY TYPE |
CONTINUOUS |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.5 AMPERES AC MOTOR LOAD AND 3.0 AMPERES DC MOTOR LOAD |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CQYJ |
MOUNTING FACILITY PATTERN |
IN-LINE SINGLE MOUNTING FACILITY |
| ADTV |
CASE MATERIAL |
METAL |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
2.0 AMPERES AC INDUCTIVE LOAD AND 6.0 AMPERES DC INDUCTIVE LOAD |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-5757 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |