| AKDX |
WINDING QUANTITY |
1 |
| APNA |
WINDING DC RESISTANCE RATING |
400.0 OHMS NOMINAL SINGLE WINDING |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| AGAV |
END ITEM IDENTIFICATION |
4920011362857 TEST SET,AUTOMATED GROUND ENGINE |
| CBME |
CUBIC MEASURE |
2.289 CUBIC INCHES |
| ABKW |
OVERALL HEIGHT |
1.300 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.025 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
10.0 AMPERES AC MOTOR LOAD AND 10.0 AMPERES DC MOTOR LOAD |
| CSQJ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE |
1.396 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
5.0 AMPERES AC LAMP LOAD AND 5.0 AMPERES DC LAMP LOAD |
| APCN |
COIL QUANTITY |
1 |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
15.0 AMPERES AC INDUCTIVE LOAD AND 12.0 AMPERES DC INDUCTIVE LOAD |
| CQYJ |
MOUNTING FACILITY PATTERN |
TRIANGLE SINGLE MOUNTING FACILITY |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.625 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CBBL |
FEATURES PROVIDED |
POLARIZED |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
25.0 AMPERES AC RESISTIVE LOAD AND 25.0 AMPERES DC RESISTIVE LOAD |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| TTQY |
TERMINAL TYPE AND QUANTITY |
11 PIN ALL FUNCTIONS |
| ABHP |
OVERALL LENGTH |
1.718 INCHES MAXIMUM |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
3 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CRXH |
TIME DELAY |
0.015 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| APNP |
DUTY TYPE |
CONTINUOUS |
| ABTD |
MOUNTING SLOT WIDTH |
0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| ADTV |
CASE MATERIAL |
METAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
3 SLOTTED HOLE SINGLE MOUNTING FACILITY |