| ABHP |
OVERALL LENGTH |
1.708 INCHES MAXIMUM |
| AKDX |
WINDING QUANTITY |
1 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
20 PIN ALL FUNCTIONS |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AGAV |
END ITEM IDENTIFICATION |
HATCH CONTROL |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.990 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.010 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
2.0 AMPERES DC LAMP LOAD |
| CBME |
CUBIC MEASURE |
2.450 CUBIC INCHES |
| ABKW |
OVERALL HEIGHT |
1.010 INCHES MAXIMUM |
| APCN |
COIL QUANTITY |
1 |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
6 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
8.0 AMPERES DC INDUCTIVE LOAD |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
TERMINALS GOLD |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| ABMK |
OVERALL WIDTH |
1.400 INCHES MINIMUM AND 1.420 INCHES MAXIMUM |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
200.0 AC AND 28.0 DC |
| APNA |
WINDING DC RESISTANCE RATING |
210.0 OHMS NOMINAL SINGLE WINDING |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
4.0 AMPERES DC MOTOR LOAD |
| CRXH |
TIME DELAY |
0.015 SECONDS NOMINAL FIXED OPERATE AND RELEASE TIME |
| APNP |
DUTY TYPE |
CONTINUOUS |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
10.0 AMPERES AC RESISTIVE LOAD AND 10.0 AMPERES DC RESISTIVE LOAD |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.140 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.160 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.412 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.462 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |