| AKDX |
WINDING QUANTITY |
1 |
| AGAV |
END ITEM IDENTIFICATION |
SLAM HANDLING |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
5.0 AMPERES AC INDUCTIVE LOAD AND 3.0 AMPERES DC INDUCTIVE LOAD |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES AC LAMP LOAD AND 1.0 AMPERES DC LAMP LOAD |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
1.0 AMPERES AC MOTOR LOAD AND 1.0 AMPERES DC MOTOR LOAD |
| ADZC |
ENVIRONMENTAL PROTECTION |
DUSTPROOF AND VIBRATION RESISTANT AND SHOCK RESISTANT |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| APCN |
COIL QUANTITY |
1 |
| ABHP |
OVERALL LENGTH |
0.810 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.640 INCHES MAXIMUM |
| CBME |
CUBIC MEASURE |
0.162 CUBIC INCHES |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
6.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| CRXH |
TIME DELAY |
0.004 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME |
| ABTD |
MOUNTING SLOT WIDTH |
0.133 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
GENERAL |
| APNP |
DUTY TYPE |
CONTINUOUS |
| ABMK |
OVERALL WIDTH |
0.312 INCHES NOMINAL |
| APNA |
WINDING DC RESISTANCE RATING |
23.0 OHMS NOMINAL SINGLE WINDING |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
5.0 AMPERES AC RESISTIVE LOAD AND 5.0 AMPERES DC RESISTIVE LOAD |
| CQYJ |
MOUNTING FACILITY PATTERN |
IN-LINE SINGLE MOUNTING FACILITY |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.062 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.078 INCHES MAXIMUM SINGLE MOUNTING FACILITY |