| MATL |
MATERIAL |
PLASTIC,POLYOLEFIN,MIL-I-81765/1,TYPE II |
| CQBC |
MINIMUM TENSILE STRENGTH |
1200 POUNDS PER SQUARE INCH |
| AGAK |
MAIN BODY LARGE END INSIDE DIAMETER |
1.220 INCHES MINIMUM AS SUPPLIED |
| AFZS |
DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END |
0.830 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| HUES |
COLOR |
BLACK |
| UKBG |
DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS |
200.0 VOLTS PER MIL /0.001 INCH/ |
| FLEX |
FLEXIBILITY |
FLEXIBLE |
| AGAP |
ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG |
90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAP |
ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG |
180.0 NOMINAL AS SUPPLIED |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABJH |
TEMP RATING |
-55.0 DEG CELSIUS AND 135.0 DEG CELSIUS |
| AFZR |
DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END |
1.440 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZP |
LARGE END WALL THICKNESS OF MAIN BODY |
0.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZQ |
SMALL END WALL THICKNESS OF MAIN BODY |
0.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| AGAJ |
MAIN BODY SMALL END INSIDE DIAMETER |
0.280 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| AGAK |
MAIN BODY LARGE END INSIDE DIAMETER |
0.700 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| AGAJ |
MAIN BODY SMALL END INSIDE DIAMETER |
1.220 INCHES MINIMUM AS SUPPLIED |
| AGAM |
DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY |
0.500 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| STYL |
STYLE DESIGNATOR |
BOOT-90 DEGREES |
| HGTH |
HEIGHT |
1.220 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |