| MATL |
MATERIAL |
PLASTIC,POLYOLEFIN,MIL-I-81765/1,TYPE II |
| CQBC |
MINIMUM TENSILE STRENGTH |
1200 POUNDS PER SQUARE INCH |
| HUES |
COLOR |
BLACK |
| CRDG |
LIP WIDTH |
0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| UKBG |
DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS |
200.0 VOLTS PER MIL /0.001 INCH/ |
| FEAT |
SPECIAL FEATURES |
INSIDE ADHESIVE COATED; RED COLOR STRIPE; 4 DRAIN HOLES |
| FLEX |
FLEXIBILITY |
FLEXIBLE |
| CQXG |
LIP HEIGHT |
0.120 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZP |
LARGE END WALL THICKNESS OF MAIN BODY |
0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| HGTH |
HEIGHT |
0.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAJ |
MAIN BODY SMALL END INSIDE DIAMETER |
0.250 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| ABJH |
TEMP RATING |
-55.0 DEG CELSIUS AND 135.0 DEG CELSIUS |
| AFZQ |
SMALL END WALL THICKNESS OF MAIN BODY |
0.045 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ADZC |
ENVIRONMENTAL PROTECTION |
FLAME RESISTANT AND CORROSION RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| AGAJ |
MAIN BODY SMALL END INSIDE DIAMETER |
0.880 INCHES MINIMUM AS SUPPLIED |
| AGAH |
MAIN BODY OVERALL LENGTH |
4.140 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAK |
MAIN BODY LARGE END INSIDE DIAMETER |
0.450 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| BNKG |
END LARGEST DIAMETER |
0.570 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAK |
MAIN BODY LARGE END INSIDE DIAMETER |
0.880 INCHES MINIMUM AS SUPPLIED |
| AGAM |
DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY |
ANY ACCEPTABLE AFTER UNRESTRICTED RECOVERY |
| STYL |
STYLE DESIGNATOR |
BOOT-90 DEGREES |