| AHSZ |
FLANGE OUTSIDE WIDTH |
1.358 INCHES MINIMUM ALL FLANGES AND 1.390 INCHES MAXIMUM ALL FLANGES |
| CSQT |
FLANGE CONNECTING FACILITY AND QUANTITY |
4 UNTHREADED HOLE ALL FLANGES FIRST CONNECTION FACILITY |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| CRLB |
WAVEGUIDE INSIDE HEIGHT |
0.318 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| CSQT |
FLANGE CONNECTING FACILITY AND QUANTITY |
2 UNTHREADED HOLE ALL FLANGES SECOND CONNECTION FACILITY |
| AHSY |
FLANGE INSIDE HEIGHT |
0.318 NOMINAL MILS ALL FLANGES AND 0.323 NOMINAL CENTIMETERS ALL FLANGES |
| STYL |
STYLE DESIGNATOR |
BEND TYPE |
| AHSF |
FLANGE QUANTITY |
2 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION (NON-CORE) |
ERR-070 |
| SFTT |
SURFACE TREATMENT |
SILVER SECOND TUBING SEGMENT ALL SURFACES |
| MATT |
MATERIAL |
ALUMINUM ALLOY THIRD TUBING SEGMENT |
| AHTW |
VOLTAGE STANDING WAVE RATIO |
1.30 |
| CSPL |
WAVEGUIDE LONGER OFFSET DISTANCE |
5.440 INCHES NOMINAL |
| AHRV |
TUBING WALL CONSTRUCTION STYLE |
SEAMLESS FIRST TUBING SEGMENT |
| AHTN |
FLANGE CONNECTING HOLE DIAMETER |
0.096 INCHES NOMINAL ALL FLANGES SECOND CONNECTION FACILITY |
| CSFC |
WAVEGUIDE OUTSIDE HEIGHT |
0.421 INCHES NOMINAL |
| FLEX |
FLEXIBILITY |
RIGID FIRST TUBING SEGMENT |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
FLEXGUIDE SURFACES SILVER |
| AHTD |
FLANGE DEPTH |
0.235 INCHES MINIMUM ALL FLANGES AND 0.255 INCHES MAXIMUM ALL FLANGES |
| CRFH |
WAVEGUIDE INSIDE WIDTH |
0.688 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, RECTANGULAR |
| FEAT |
SPECIAL FEATURES |
PRESSURIZED FLANGES FURNISHED W/ RF/ PRESSURE SEAL AND 0.625 IN. LG SCREW AND LOCKWASHER FOR EA MTG HOLE; JACKET MATERIAL DEPENDS ON USE |
| AHRV |
TUBING WALL CONSTRUCTION STYLE |
CONVOLUTE SECOND TUBING SEGMENT |
| CTCJ |
FLANGE STYLE |
CONTACT, DOUBLE RIDGE TYPE ALL FLANGES |
| AHRV |
TUBING WALL CONSTRUCTION STYLE |
SEAMLESS THIRD TUBING SEGMENT |
| AHTA |
FLANGE OUTSIDE HEIGHT |
1.358 INCHES MINIMUM ALL FLANGES AND 1.390 INCHES MAXIMUM ALL FLANGES |
| MATT |
MATERIAL |
COPPER ALLOY SECOND TUBING SEGMENT |
| FLEX |
FLEXIBILITY |
FLEXIBLE SECOND TUBING SEGMENT |
| AHTN |
FLANGE CONNECTING HOLE DIAMETER |
0.143 INCHES MINIMUM ALL FLANGES FIRST CONNECTION FACILITY AND 0.149 INCHES MAXIMUM ALL FLANGES FIRST CONNECTION FACILITY |
| MATT |
MATERIAL |
RUBBER CHLOROPRENE SINGLE TUBING JACKET OR RUBBER SILICONE SINGLE TUBING JACKET |
| FLEX |
FLEXIBILITY |
RIGID THIRD TUBING SEGMENT |
| MATT |
MATERIAL |
ALUMINUM ALLOY FIRST TUBING SEGMENT |
| CQHN |
WAVEGUIDE OUTSIDE WIDTH |
0.791 INCHES NOMINAL |
| AHSX |
FLANGE INSIDE WIDTH |
0.688 INCHES MINIMUM ALL FLANGES AND 0.693 INCHES MAXIMUM ALL FLANGES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ERR-070 OR ERR-070 OR ERR-070 |
| CWBG |
WAVEGUIDE OFFSET DISTANCE |
3.770 NOMINAL INCHES |