| AHSX |
FLANGE INSIDE WIDTH |
0.897 INCHES MINIMUM ALL FLANGES AND 0.903 INCHES MAXIMUM ALL FLANGES |
| CSFC |
WAVEGUIDE OUTSIDE HEIGHT |
0.500 INCHES NOMINAL |
| ACJL |
BEND ANGLE IN DEG |
90.0 THIRD BEND E-PLANE |
| CSQT |
FLANGE CONNECTING FACILITY AND QUANTITY |
8 UNTHREADED HOLE ALL FLANGES SINGLE CONNECTION FACILITY |
| AHSF |
FLANGE QUANTITY |
2 |
| AHTA |
FLANGE OUTSIDE HEIGHT |
1.570 INCHES MINIMUM ALL FLANGES AND 1.610 INCHES MAXIMUM ALL FLANGES |
| CTCJ |
FLANGE STYLE |
CONTACT TYPE ALL FLANGES |
| AHTX |
INSERTION LOSS IN DECIBELS |
0.05 |
| AHTD |
FLANGE DEPTH |
0.480 INCHES MINIMUM ALL FLANGES AND 0.520 INCHES MAXIMUM ALL FLANGES |
| AHSZ |
FLANGE OUTSIDE WIDTH |
2.070 INCHES MINIMUM ALL FLANGES AND 2.110 INCHES MAXIMUM ALL FLANGES |
| SFTT |
SURFACE TREATMENT |
PAINT ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| CRFH |
WAVEGUIDE INSIDE WIDTH |
0.900 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
TUBING WALL CONSTRUCTION CAN ALSO BE LAMINATED |
| AHTR |
FLANGE MANUFACTURER PART NUMBER (NON-CORE) |
M3922/52-022 ALL FLANGES |
| AHRV |
TUBING WALL CONSTRUCTION STYLE |
SEAMLESS SINGLE TUBING SEGMENT |
| AHSY |
FLANGE INSIDE HEIGHT |
0.397 INCHES MINIMUM ALL FLANGES AND 0.401 INCHES MAXIMUM ALL FLANGES |
| FLEX |
FLEXIBILITY |
RIGID SINGLE TUBING SEGMENT |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES |
| CQHN |
WAVEGUIDE OUTSIDE WIDTH |
1.000 INCHES NOMINAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
10.0 POUNDS PER SQUARE INCH GAGE |
| CRLB |
WAVEGUIDE INSIDE HEIGHT |
0.400 INCHES NOMINAL |
| AHSE |
TUBING MANUFACTURER PART NUMBER (NON-CORE) |
M85/1-077-014 SINGLE TUBING SEGMENT |
| AHTN |
FLANGE CONNECTING HOLE DIAMETER |
0.167 INCHES MINIMUM ALL FLANGES SINGLE CONNECTION FACILITY AND 0.171 INCHES MAXIMUM ALL FLANGES SINGLE CONNECTION FACILITY |
| MATT |
MATERIAL |
ALUMINUM ALLOY SINGLE TUBING SEGMENT |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| MATT |
MATERIAL |
ALUMINUM ALLOY ALL FLANGE |
| AHTW |
VOLTAGE STANDING WAVE RATIO |
1.10 |
| ACJL |
BEND ANGLE IN DEG |
23.3 FIRST BEND H-PLANE |
| ACJL |
BEND ANGLE IN DEG |
90.0 SECOND BEND E-PLANE |