| AHTA |
FLANGE OUTSIDE HEIGHT |
1.578 INCHES MINIMUM ALL FLANGES AND 1.608 INCHES MAXIMUM ALL FLANGES |
| AHSY |
FLANGE INSIDE HEIGHT |
0.399 INCHES MINIMUM ALL FLANGES AND 0.401 INCHES MAXIMUM ALL FLANGES |
| AHSZ |
FLANGE OUTSIDE WIDTH |
2.078 INCHES MINIMUM ALL FLANGES AND 2.108 INCHES MAXIMUM ALL FLANGES |
| MATT |
MATERIAL |
COPPER ALL TUBING SEGMENT |
| CSQT |
FLANGE CONNECTING FACILITY AND QUANTITY |
8 UNTHREADED HOLE ALL FLANGES SINGLE CONNECTION FACILITY |
| AHTW |
VOLTAGE STANDING WAVE RATIO |
1.20 |
| STYL |
STYLE DESIGNATOR |
BEND TYPE |
| AHSF |
FLANGE QUANTITY |
2 |
| AHRV |
TUBING WALL CONSTRUCTION STYLE |
SEAMLESS ALL TUBING SEGMENT |
| CTCJ |
FLANGE STYLE |
CONTACT TYPE ALL FLANGES |
| AHTN |
FLANGE CONNECTING HOLE DIAMETER |
0.193 INCHES MINIMUM ALL FLANGES SINGLE CONNECTION FACILITY AND 0.199 INCHES MAXIMUM ALL FLANGES SINGLE CONNECTION FACILITY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION (NON-CORE) |
QQ-C-502,OXYGEN-FREE FED SPEC SINGLE MATERIAL RESPONSE ALL TUBING SEGMENT |
| FLEX |
FLEXIBILITY |
RIGID ALL TUBING SEGMENT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION (NON-CORE) |
MIL-C-81021 TEMPER HT MIL SPEC SINGLE MATERIAL RESPONSE ALL FLANGE |
| FEAT |
SPECIAL FEATURES |
WAVEGUIDE ASSEMBLY HAS THREE ADDITIONAL WAVEGUIDE SECTIONS WITH ADAPTERS,MTD ACROSS LONGEST LEG OF WAVEGUIDE ASSEMBLY,WAVEGUIDE SECTIONS ARE EACH 4.000 IN. LG |
| CQHN |
WAVEGUIDE OUTSIDE WIDTH |
1.300 INCHES NOMINAL |
| CRFH |
WAVEGUIDE INSIDE WIDTH |
0.900 INCHES NOMINAL |
| CSFC |
WAVEGUIDE OUTSIDE HEIGHT |
0.800 INCHES NOMINAL |
| AHTR |
FLANGE MANUFACTURER PART NUMBER (NON-CORE) |
DASH-2 ALL FLANGES |
| AHSX |
FLANGE INSIDE WIDTH |
0.899 INCHES MINIMUM ALL FLANGES AND 0.901 INCHES MAXIMUM ALL FLANGES |
| CSPL |
WAVEGUIDE LONGER OFFSET DISTANCE |
9.748 INCHES MINIMUM AND 9.752 INCHES MAXIMUM |
| CRLB |
WAVEGUIDE INSIDE HEIGHT |
0.400 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| MATT |
MATERIAL |
BERYLLIUM ALL FLANGE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
5.0 POUNDS PER SQUARE INCH GAGE |
| SFTT |
SURFACE TREATMENT |
CADMIUM ALL TUBING SEGMENT OUTSIDE SURFACES AND PAINT ALL TUBING SEGMENT OUTSIDE SURFACES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,CLASS 1,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE ALL TUBING SEGMENT OUTSIDE SURFACES AND WS9780-10001 MFR REF SINGLE TREATMENT RESPONSE ALL TUBING SEGMENT OUTSIDE SURFACES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE ALL FLANGE OUTSIDE SURFACES AND WS9780-10001 MFR REF SINGLE TREATMENT RESPONSE ALL FLANGE OUTSIDE SURFACES |