| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
1.585 INCHES MINIMUM AND 1.615 INCHES MAXIMUM |
| CGGK |
MOUNTING THREAD QUANTITY |
56 PER INCH |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED |
| ASYD |
OVERALL ATTENUATION RANGE IN DECIBELS |
+0.0/+20.0 |
| ABKW |
OVERALL HEIGHT |
2.810 INCHES NOMINAL |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.585 INCHES MINIMUM AND 1.615 INCHES MAXIMUM |
| ASYC |
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS |
0.7 |
| AJDB |
POWER RATING |
5.0 WATTS AVERAGE |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 CONNECTOR, COAXIAL, FEMALE |
| AGAV |
END ITEM IDENTIFICATION |
COUNTERMEASURES SET,AN/ALQ-170 |
| AAQL |
BODY STYLE |
COAXIAL TYPE |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 THREADED HOLE |
| CRYY |
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER |
0.086 INCHES |
| AAFS |
APPLICATION DESIGN |
TRANSMISSION LINE |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| ABMK |
OVERALL WIDTH |
0.530 INCHES MAXIMUM |
| AHUC |
COAXIAL CONNECTOR SERIES DESIGNATION |
SMA |
| ASYF |
ATTENUATION VARIATION METHOD |
CONTINUOUS |
| ABXF |
SHAFT LENGTH |
0.825 INCHES MINIMUM AND 0.915 INCHES MAXIMUM |
| CTGG |
IMPEDANCE RATING IN OHMS |
50.0 INPUT |
| CQYJ |
MOUNTING FACILITY PATTERN |
FOUR POSITION RECTANGULAR |
| ABWV |
SHAFT DIAMETER |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.570 INCHES MAXIMUM |
| AAFZ |
BODY MATERIAL |
ALUMINUM ALLOY |
| BNGR |
FREQUENCY RANGE |
7.000 GIGAHERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM |
| CQTQ |
ADJUSTMENT DEVICE TYPE AND QUANTITY |
1 SHAFT |
| AHTW |
VOLTAGE STANDING WAVE RATIO |
1.50 |