| AJSL |
BODY SIZE |
11 |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
17.00 OUTPUT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
4.0 CENTIMETER-GRAMS MAXIMUM |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
18.10 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5520 INCHES MINIMUM SINGLE SHAFT AND 0.5760 INCHES MAXIMUM SINGLE SHAFT |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.7910 INCHES MINIMUM AND 1.8010 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.3480 INCHES MINIMUM AND 2.3720 INCHES MAXIMUM |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
3.00 NOMINAL |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
78.50 NOMINAL |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
107.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AJWR |
SHOULDER LENGTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AJST |
ROTOR INPUT CURRENT RATING |
280.0 MILLIAMPERES NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
26.00 |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
0.454 ROTOR TO STATOR NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
9.00 NOMINAL |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
950.0 MILLIWATTS NOMINAL |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
81.70 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES MINIMUM SINGLE SHAFT AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| AJWQ |
PILOT LENGTH |
0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
16.0 CENTIMETER-GRAMS MAXIMUM |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0500 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES MINIMUM SINGLE SHAFT AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-10.0/+10.0 |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
1.0600 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |