| AJSL |
BODY SIZE |
11 |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
NOT RATED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 WIRE LEAD |
| CQTM |
TERMINAL LOCATION |
REAR |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.8120 INCHES NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.0 CENTIMETER-GRAMS NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND SINGLE SHAFT |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
NOT RATED |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
300.0 MILLIWATTS NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
1514.00 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
2694.00 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| AJSW |
ZRO RESISTANCE IN OHMS |
39.00 NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.6830 INCHES NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
26.00 NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
15.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5620 INCHES NOMINAL SINGLE SHAFT |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
0.099 ROTOR TO STATOR NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
15.0 CENTIMETER-GRAMS NOMINAL |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
14000.00 NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0500 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES NOMINAL |
| AJTA |
ZRS RESISTANCE IN OHMS |
44.00 NOMINAL |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
156.00 NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.3080 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSP |
STATOR INPUT CURRENT RATING |
10.0 MILLIAMPERES NOMINAL |
| AJST |
ROTOR INPUT CURRENT RATING |
NOT RATED |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
6.000 INPUT TO OUTPUT NOMINAL |