| AAVL |
PILOT DIAMETER |
0.6250 INCHES MAXIMUM |
| AJSL |
BODY SIZE |
11 |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
30.0 MILLIWATTS NOMINAL |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.7340 INCHES MAXIMUM |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| AAVH |
SHOULDER DIAMETER |
1.0000 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CSJY |
TRANSFORMATION RATIO |
2.203 ROTOR TO STATOR NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
4.0 CENTIMETER-GRAMS NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-2.0/+2.0 |
| AJWQ |
PILOT LENGTH |
0.0620 NOMINAL INCHES |
| CWXK |
SHAFT RADIAL PLAY DETERMINING WEIGHT |
4.0 OUNCES |
| AJWR |
SHOULDER LENGTH |
0.0620 NOMINAL INCHES |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
80.70 NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
659.00 NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
ERR-090 |
| AJWG |
SHAFT MAXIMUM RADIAL PLAY |
0.0010 INCHES |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
30.10 NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
25.00 INPUT |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
79.20 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.3120 INCHES NOMINAL SINGLE SHAFT |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
577.00 NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
4.200 OUTPUT TO INPUT NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| ABHP |
OVERALL LENGTH |
2.1840 INCHES MAXIMUM |
| ABKK |
FLANGE DIAMETER |
1.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJWH |
SHAFT END PLAY |
0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| CWYF |
SHAFT END PLAY DETERMINING WEIGHT |
16.0 OUNCES |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
60.00 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
385.00 NOMINAL |
| AJXB |
SHAFT MAXIMUM RUNOUT |
0.0014 INCHES |
| AJWE |
SHAFT RADIAL PLAY TEST POINT |
0.125 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0500 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJSP |
STATOR INPUT CURRENT RATING |
21.0 MILLIAMPERES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
16.0 CENTIMETER-GRAMS NOMINAL |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
3340.00 NOMINAL |