| AAFZ |
BODY MATERIAL |
ANY ACCEPTABLE |
| ABHP |
OVERALL LENGTH |
1.4780 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.0 CENTIMETER-GRAMS NOMINAL |
| AJTC |
ZSS RESISTANCE IN OHMS |
501.00 NOMINAL |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
ANY ACCEPTABLE |
| CRSJ |
SHAFT TYPE |
ROUND SINGLE SHAFT |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| CSJY |
TRANSFORMATION RATIO |
0.524 ROTOR TO STATOR NOMINAL |
| ABKK |
FLANGE DIAMETER |
0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AJSL |
BODY SIZE |
8 |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
330.00 NOMINAL |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
1770.00 NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
8.500 INPUT TO OUTPUT NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.8950 INCHES MINIMUM SINGLE SHAFT AND 0.9000 INCHES MAXIMUM SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.2230 INCHES MINIMUM SINGLE SHAFT AND 0.2370 INCHES MAXIMUM SINGLE SHAFT |
| ABPA |
UNDERCUT DIAMETER |
0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CSFG |
PLUS J ZSS REACTANCE IN OHMS |
190.00 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2410 INCHES MAXIMUM |
| AJST |
ROTOR INPUT CURRENT RATING |
ANY ACCEPTABLE |
| AJSY |
ZSO RESISTANCE IN OHMS |
80.00 NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
470.00 NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0/+7.0 |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
6.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0430 INCHES NOMINAL |