| AJSL |
BODY SIZE |
11 |
| AJSP |
STATOR INPUT CURRENT RATING |
17.0 MILLIAMPERES MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
4.0 CENTIMETER-GRAMS MAXIMUM |
| CQTM |
TERMINAL LOCATION |
SIDE |
| CRSJ |
SHAFT TYPE |
ROUND SINGLE SHAFT |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
855.00 NOMINAL |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
204.00 NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
21.000 INPUT TO OUTPUT NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
263.00 NOMINAL |
| AJVJ |
INTERAXIS ERROR ANGULAR RANGE IN MINUTES |
-10.0/+10.0 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.5900 INCHES MAXIMUM |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
850.00 NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
2430.00 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
250.0 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
1453.00 NOMINAL |
| ABHP |
OVERALL LENGTH |
1.9650 INCHES MINIMUM AND 1.9800 INCHES MAXIMUM |
| ABKK |
FLANGE DIAMETER |
1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 WIRE LEAD |
| ABPC |
UNDERCUT WIDTH |
0.0470 INCHES MINIMUM AND 0.0530 INCHES MAXIMUM |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
47.0 MILLIWATTS NOMINAL |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
3400.00 NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| ABXF |
SHAFT LENGTH |
0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| CSJY |
TRANSFORMATION RATIO |
1.666 ROTOR TO STATOR NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
12.0 NOMINAL |
| AJTA |
ZRS RESISTANCE IN OHMS |
2930.00 NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJTW |
TRANSFORMATION RATIO EQUALITY IN PERCENT |
0.4 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES MAXIMUM |