| AAFZ |
BODY MATERIAL |
ANY ACCEPTABLE |
| AJSY |
ZSO RESISTANCE IN OHMS |
10.20 MINIMUM AND 13.80 MAXIMUM |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
17.80 MINIMUM AND 22.20 MAXIMUM |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.0 CENTIMETER-GRAMS NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
33.30 MINIMUM AND 40.70 MAXIMUM |
| AJTA |
ZRS RESISTANCE IN OHMS |
66.80 MINIMUM AND 93.20 MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
540.50 NOMINAL |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| ABWV |
SHAFT DIAMETER |
0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
1.9380 INCHES NOMINAL |
| ABKK |
FLANGE DIAMETER |
0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 TURRET |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AJSL |
BODY SIZE |
8 |
| ABXF |
SHAFT LENGTH |
0.3320 INCHES NOMINAL SINGLE SHAFT |
| AJSW |
ZRO RESISTANCE IN OHMS |
45.90 MINIMUM AND 62.10 MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
8.500 INPUT TO OUTPUT NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0200 INCHES MINIMUM SINGLE SHAFT AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| AJST |
ROTOR INPUT CURRENT RATING |
100.0 MILLIAMPERES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.3680 INCHES MAXIMUM |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
540.0 MILLIWATTS NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
10.80 MINIMUM AND 13.20 MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
234.00 MINIMUM AND 286.00 MAXIMUM |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
2200.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
30.00 OUTPUT |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0/+7.0 |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
6.0 CENTIMETER-GRAMS NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0150 INCHES MINIMUM SINGLE SHAFT AND 0.0250 INCHES MAXIMUM SINGLE SHAFT |
| AJWQ |
PILOT LENGTH |
0.0430 INCHES NOMINAL |