| AJVF |
PHASE SHIFT ANGLE IN DEG |
5.000 INPUT TO OUTPUT MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-8.0/+8.0 |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
| AJSL |
BODY SIZE |
15 |
| ABWV |
SHAFT DIAMETER |
0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJSP |
STATOR INPUT CURRENT RATING |
215.0 MILLIAMPERES MAXIMUM |
| ABKK |
FLANGE DIAMETER |
1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
80.00 MINIMUM AND 84.00 MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| ABPA |
UNDERCUT DIAMETER |
1.3120 INCHES NOMINAL |
| CQWQ |
SHAFT THREAD LENGTH |
0.2320 INCHES NOMINAL SINGLE SHAFT |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
1.1000 INCHES NOMINAL |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
27.00 MINIMUM AND 33.00 MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.186 INCHES SINGLE SHAFT |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
90.0 NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.9300 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-20708 SPECIFICATION |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.011 INCH-OUNCES MINIMUM |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
113.00 MINIMUM AND 138.00 MAXIMUM |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/17 GOVERNMENT SPECIFICATION |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AKAN |
SHAFT THREAD CLASS |
2A |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| ABHP |
OVERALL LENGTH |
2.4700 INCHES NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
3.5 WATTS MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SCREW |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
375.00 MINIMUM AND 525.00 MAXIMUM |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
1.154 ROTOR TO STATOR NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5400 INCHES NOMINAL SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.05 INCH-OUNCES MAXIMUM |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |