| AJSL |
BODY SIZE |
11 |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
9.0 CENTIMETER-GRAMS NOMINAL |
| AJVP |
MAXIMUM LINEAR RANGE IN DEG |
-50.0/+50.0 |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
800.00 NOMINAL |
| CQTM |
TERMINAL LOCATION |
REAR |
| ABXF |
SHAFT LENGTH |
0.3130 INCHES NOMINAL SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.0 CENTIMETER-GRAMS NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0320 INCHES MAXIMUM SINGLE SHAFT |
| AAVH |
SHOULDER DIAMETER |
1.0000 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
85.00 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 WIRE LEAD |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
70.00 |
| AJVR |
OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS |
1.02 |
| AJWQ |
PILOT LENGTH |
0.0620 NOMINAL INCHES |
| AJST |
ROTOR INPUT CURRENT RATING |
32.0 MILLIAMPERES NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
680.00 NOMINAL |
| CWXK |
SHAFT RADIAL PLAY DETERMINING WEIGHT |
4.0 OUNCES |
| AJWR |
SHOULDER LENGTH |
0.0620 NOMINAL INCHES |
| AJWG |
SHAFT MAXIMUM RADIAL PLAY |
0.0005 INCHES |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
ERR-090 |
| ABKK |
FLANGE DIAMETER |
1.0620 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
154.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AAVL |
PILOT DIAMETER |
0.5000 INCHES MAXIMUM |
| AJWH |
SHAFT END PLAY |
0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.9800 INCHES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| CWYF |
SHAFT END PLAY DETERMINING WEIGHT |
0.8 OUNCES |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
4.800 INPUT TO OUTPUT NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0810 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
150.00 NOMINAL |
| AJVQ |
LINEARITY IN PERCENT |
0.50 |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.6000 INCHES MAXIMUM |
| CQZS |
SHAFT SLOT DEPTH |
0.0320 INCHES MAXIMUM SINGLE SHAFT |
| AJXB |
SHAFT MAXIMUM RUNOUT |
0.0010 INCHES |
| AJWE |
SHAFT RADIAL PLAY TEST POINT |
0.125 INCHES MAXIMUM |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |