| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
2.0 NOMINAL |
| AJSL |
BODY SIZE |
15 |
| CQTM |
TERMINAL LOCATION |
REAR |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.5000 INCHES NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
10.0 CENTIMETER-GRAMS NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
70000.0 NOMINAL |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
NOT RATED |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
2.0 NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
NOT RATED |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
20.00 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.5910 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
25.0 CENTIMETER-GRAMS NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
1.60 NOMINAL |
| ABHP |
OVERALL LENGTH |
2.1310 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJST |
ROTOR INPUT CURRENT RATING |
5.0 MILLIAMPERES MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0310 INCHES NOMINAL SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJSP |
STATOR INPUT CURRENT RATING |
5.0 MILLIAMPERES MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-30.0/+30.0 |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| CRHN |
SHAFT SLOT WIDTH |
0.0210 INCHES NOMINAL SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
0.625 ROTOR TO STATOR NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.3070 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5400 INCHES NOMINAL SINGLE SHAFT |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
4.00 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |