| CQTM |
TERMINAL LOCATION |
REAR |
| AAVH |
SHOULDER DIAMETER |
3.3750 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-2335 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAVL |
PILOT DIAMETER |
1.6300 INCHES MAXIMUM |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| ABKU |
FLANGE THICKNESS |
0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AJSS |
FREQUENCY IN HERTZ |
60.0 NOMINAL |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.250 INCHES SINGLE SHAFT |
| AJST |
ROTOR INPUT CURRENT RATING |
600.0 MILLIAMPERES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.7600 INCHES MINIMUM SINGLE SHAFT AND 0.7800 INCHES MAXIMUM SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
6.3600 INCHES MAXIMUM |
| AJWR |
SHOULDER LENGTH |
1.2450 NOMINAL MILS AND 1.2550 NOMINAL CENTIMETERS |
| AJSL |
BODY SIZE |
5 |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND DOUBLE FLANGE B |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-2335 GOVERNMENT SPECIFICATION |
| AJWH |
SHAFT END PLAY |
0.0081 INCHES NOMINAL |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AGRS |
DISTANCE BETWEEN FLANGES |
1.8070 INCHES MINIMUM AND 1.8170 INCHES MAXIMUM |
| AHCG |
MAXIMUM TEMP RISE |
50.0 DEG CELSIUS |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
7.0 WATTS MICROWATTS |
| ABWV |
SHAFT DIAMETER |
0.2498 INCHES MINIMUM SINGLE SHAFT AND 0.2500 INCHES MAXIMUM SINGLE SHAFT |
| FEAT |
SPECIAL FEATURES |
ROUND,THREADED SHAFT WITH SLOT; SLOT DEPTH 0.050 INCH; SLOT WIDTH 0.030 INCH |
| CQWQ |
SHAFT THREAD LENGTH |
0.1770 INCHES MINIMUM SINGLE SHAFT AND 0.1970 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ |
SHAFT TYPE |
ROUND, THREADED SINGLE SHAFT |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| ABKK |
FLANGE DIAMETER |
3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.400 INCH-OUNCES MINIMUM |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| AJWQ |
PILOT LENGTH |
0.1750 NOMINAL INCHES |