| ABKK |
FLANGE DIAMETER |
2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-8.0/+8.0 |
| AAVH |
SHOULDER DIAMETER |
1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
5.0 WATTS NOMINAL |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.130 INCH-OUNCES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.6930 INCHES MINIMUM SINGLE SHAFT AND 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AAVL |
PILOT DIAMETER |
0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| AJSL |
BODY SIZE |
23 |
| AJTA |
ZRS RESISTANCE IN OHMS |
249.00 NOMINAL |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
75.00 OUTPUT |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
311.00 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
60.0 NOMINAL |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
96 SINGLE SHAFT |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.250 INCHES SINGLE SHAFT |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
3.4450 INCHES MAXIMUM |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
79.00 NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.20 INCH-OUNCES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND D |
| AJST |
ROTOR INPUT CURRENT RATING |
210.0 MILLIAMPERES NOMINAL |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-20708 SPECIFICATION |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| ABPM |
BODY DIAMETER |
1.9900 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| AAZW |
SECOND SHOULDER DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
494.00 NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/94 GOVERNMENT SPECIFICATION |
| ABKU |
FLANGE THICKNESS |
0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AAZX |
SECOND SHOULDER LENGTH |
0.1670 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM |
| AJSY |
ZSO RESISTANCE IN OHMS |
98.00 NOMINAL |
| CQWQ |
SHAFT THREAD LENGTH |
0.2660 INCHES NOMINAL SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 SCREW |
| AJWR |
SHOULDER LENGTH |
0.2410 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
4.2940 INCHES NOMINAL |
| AJVM |
SPLINE TOOTH QUANTITY |
22 SINGLE SHAFT |
| AJSW |
ZRO RESISTANCE IN OHMS |
132.00 NOMINAL |
| AJWV |
AFT OF FIRST FLANGE DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| CTDW |
PLUS J ZSO-90 REACTANCE IN OHMS |
90.00 NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
65.0 DEG CELSIUS |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
0.50 INCH-OUNCES MAXIMUM |
| AJTE |
ZSO-90 RESISTANCE IN OHMS |
90.00 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM |
| CSJY |
TRANSFORMATION RATIO |
0.783 ROTOR TO STATOR NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.2402 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
125.00 |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |