| ABKK |
FLANGE DIAMETER |
2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| AKAN |
SHAFT THREAD CLASS |
3A |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
3.4350 INCHES MINIMUM AND 3.4450 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.6930 INCHES MINIMUM SINGLE SHAFT AND 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AAVL |
PILOT DIAMETER |
0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
60.00 |
| AJSL |
BODY SIZE |
23 |
| AJWR |
SHOULDER LENGTH |
0.2500 INCHES NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.9890 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.250 INCHES SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.2500 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
1.9900 INCHES MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.20 INCH-OUNCES MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0460 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND D |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
90.0 NOMINAL |
| CQWQ |
SHAFT THREAD LENGTH |
0.3100 INCHES NOMINAL SINGLE SHAFT |
| AAZW |
SECOND SHOULDER DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
240.0 MILLIWATTS MAXIMUM |
| AJSP |
STATOR INPUT CURRENT RATING |
6.0 MILLIAMPERES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 SCREW |
| AJWV |
AFT OF FIRST FLANGE DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| CRSJ |
SHAFT TYPE |
ROUND, THREADED SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
0.735 ROTOR TO STATOR NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-16892 SPECIFICATION |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-6.0/+6.0 |
| AAZX |
SECOND SHOULDER LENGTH |
0.1700 INCHES NOMINAL |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
30.00 OUTPUT |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
0.50 INCH-OUNCES MAXIMUM |
| AAFZ |
BODY MATERIAL |
ALUMINUM |
| ABWV |
SHAFT DIAMETER |
0.2402 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
4.2430 INCHES MINIMUM AND 4.2940 INCHES MAXIMUM |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |