| AJST |
ROTOR INPUT CURRENT RATING |
47.0 MILLIAMPERES NOMINAL |
| CSFG |
PLUS J ZSS REACTANCE IN OHMS |
23.60 NOMINAL |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
630.00 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 WIRE LEAD |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
24.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.6910 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
600.0 MILLIWATTS NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
NOT RATED |
| AJVJ |
INTERAXIS ERROR ANGULAR RANGE IN MINUTES |
-10.0/+10.0 |
| ABWV |
SHAFT DIAMETER |
0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
9.000 INPUT TO OUTPUT NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
143.00 NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
270.00 NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AJTC |
ZSS RESISTANCE IN OHMS |
70.00 NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AJSL |
BODY SIZE |
8 |
| AJSP |
STATOR INPUT CURRENT RATING |
NOT RATED |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
15.0 CENTIMETER-GRAMS NOMINAL |
| ABHP |
OVERALL LENGTH |
1.6310 INCHES MAXIMUM |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
NOT RATED |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| ABXF |
SHAFT LENGTH |
0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
39.00 NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
0.416 ROTOR TO STATOR NOMINAL |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
142.00 NOMINAL |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2410 INCHES MAXIMUM |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
8.0 CENTIMETER-GRAMS NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
10.0 DEG CELSIUS |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0/+7.0 |
| AJWQ |
PILOT LENGTH |
0.0430 INCHES NOMINAL |