| AJWR |
SHOULDER LENGTH |
0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/25 GOVERNMENT SPECIFICATION |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
| AJSL |
BODY SIZE |
16 |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.050 INCH-OUNCES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJSP |
STATOR INPUT CURRENT RATING |
24.0 MILLIAMPERES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.5775 INCHES MINIMUM AND 2.5780 INCHES MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
60.00 |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.184 INCHES SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
8.000 INPUT TO OUTPUT NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
40.00 OUTPUT |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| ABXF |
SHAFT LENGTH |
2.6330 INCHES NOMINAL SINGLE SHAFT |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-20708 SPECIFICATION |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AAVL |
PILOT DIAMETER |
0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.1330 INCHES MAXIMUM |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
600.0 MILLIWATTS NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AKAN |
SHAFT THREAD CLASS |
2A |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ABKK |
FLANGE DIAMETER |
1.5320 INCHES MINIMUM AND 1.5410 INCHES MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-10.0/+10.0 |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| CSJY |
TRANSFORMATION RATIO |
0.735 ROTOR TO STATOR NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| CQWQ |
SHAFT THREAD LENGTH |
0.2000 INCHES NOMINAL SINGLE SHAFT |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |