| AJTT |
STATOR DC RESISTANCE IN OHMS |
175.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.3750 INCHES NOMINAL REAR SHAFT |
| AJSL |
BODY SIZE |
15 |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
17.2 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 WIRE LEAD |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
10.000 INPUT TO OUTPUT NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
400.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
1.3120 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED BOTH SHAFTS |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
100.0 MILLIWATTS NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0210 INCHES MINIMUM BOTH SHAFTS AND 0.0310 INCHES MAXIMUM BOTH SHAFTS |
| ABHP |
OVERALL LENGTH |
2.4440 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.5910 INCHES NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-20.0/+20.0 |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
7.0 CENTIMETER-GRAMS NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
15.0 CENTIMETER-GRAMS NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
2100.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.4780 INCHES NOMINAL FRONT SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.8750 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES MAXIMUM |
| AJST |
ROTOR INPUT CURRENT RATING |
12.0 MILLIAMPERES NOMINAL |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| AJSP |
STATOR INPUT CURRENT RATING |
14.0 MILLIAMPERES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM BOTH SHAFTS AND 0.1200 INCHES MAXIMUM BOTH SHAFTS |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
700.00 NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0210 INCHES MINIMUM BOTH SHAFTS AND 0.0310 INCHES MAXIMUM BOTH SHAFTS |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |