| AAFZ |
BODY MATERIAL |
ANY ACCEPTABLE |
| AJSL |
BODY SIZE |
11 |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.0 CENTIMETER-GRAMS MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.9750 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.9750 INCHES NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0220 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.3750 INCHES NOMINAL SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-15.0/+15.0 |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
7.65 MINIMUM AND 9.35 MAXIMUM |
| ABKK |
FLANGE DIAMETER |
1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
736.0 MILLIWATTS MINIMUM AND 1100.0 MILLIWATTS MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
22.00 OUTPUT |
| CRHN |
SHAFT SLOT WIDTH |
0.0220 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
96.30 MINIMUM AND 117.70 MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| AJSW |
ZRO RESISTANCE IN OHMS |
13.60 MINIMUM AND 18.40 MAXIMUM |
| AJST |
ROTOR INPUT CURRENT RATING |
240.0 MILLIAMPERES MINIMUM AND 264.0 MILLIAMPERES MAXIMUM |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
7.56 MINIMUM AND 10.24 MAXIMUM |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.6000 INCHES MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
16.29 MINIMUM AND 19.91 MAXIMUM |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
2.70 MINIMUM AND 3.30 MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0500 INCHES NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
3.14 MINIMUM AND 4.26 MAXIMUM |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
6.0 CENTIMETER-GRAMS MAXIMUM |
| AJTA |
ZRS RESISTANCE IN OHMS |
18.70 MINIMUM AND 25.30 MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |