| AAFZ |
BODY MATERIAL |
ANY ACCEPTABLE |
| AJSL |
BODY SIZE |
11 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.0590 INCHES MINIMUM AND 2.0650 INCHES MAXIMUM |
| CWFM |
SHAFT FLATTED PORTION LENGTH |
0.7060 INCHES NOMINAL SINGLE SHAFT |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
15.00 OUTPUT |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
15.00 |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
NOT RATED |
| AJWR |
SHOULDER LENGTH |
0.0590 INCHES MINIMUM |
| CQTM |
TERMINAL LOCATION |
REAR |
| ABWV |
SHAFT DIAMETER |
0.1247 INCHES MINIMUM SINGLE SHAFT AND 0.1257 INCHES MAXIMUM SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
8.000 INPUT TO OUTPUT MINIMUM AND 10.000 INPUT TO OUTPUT MAXIMUM |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
180.00 MINIMUM AND 270.00 MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.6940 INCHES MINIMUM AND 2.7300 INCHES MAXIMUM |
| CTJK |
SHAFT FLATTED PORTION THICKNESS |
0.1060 INCHES NOMINAL SINGLE SHAFT |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJTY |
ZCO RESISTANCE IN OHMS |
314.50 MINIMUM AND 425.50 MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
1467.00 MINIMUM AND 1793.00 MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
NOT RATED |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
332.00 MINIMUM AND 498.00 MAXIMUM |
| AJSW |
ZRO RESISTANCE IN OHMS |
493.00 MINIMUM AND 667.00 MAXIMUM |
| AJSP |
STATOR INPUT CURRENT RATING |
22.0 MILLIAMPERES NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
314.50 MINIMUM AND 425.50 MAXIMUM |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
516.80 MINIMUM AND 699.20 MAXIMUM |
| CRHN |
SHAFT SLOT WIDTH |
0.0320 INCHES NOMINAL SINGLE SHAFT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
12 SCREW |
| ABPA |
UNDERCUT DIAMETER |
0.9800 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
0.985 ROTOR TO STATOR MINIMUM AND 1.015 ROTOR TO STATOR MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
1260.00 MINIMUM AND 1540.00 MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.7120 INCHES MINIMUM SINGLE SHAFT AND 0.7130 INCHES MAXIMUM SINGLE SHAFT |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
160.0 MILLIWATTS NOMINAL |
| AJTA |
ZRS RESISTANCE IN OHMS |
516.80 MINIMUM AND 699.20 MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0650 INCHES MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
7.0 CENTIMETER-GRAMS NOMINAL |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
15.0 CENTIMETER-GRAMS NOMINAL |
| CSPK |
PLUS J ZCO REACTANCE IN OHMS |
1260.00 MINIMUM AND 1540.00 MAXIMUM |
| AJVD |
COMPENSATOR TRANSFORMATION RATIO IN PERCENT |
ANY ACCEPTABLE |
| ABKU |
FLANGE THICKNESS |
0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJVC |
COMPENSATOR DC RESISTANCE IN OHMS |
ANY ACCEPTABLE |
| ABKK |
FLANGE DIAMETER |
1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0450 INCHES NOMINAL |
| AJTX |
COMPENSATION METHOD |
WINDING COMPENSATED |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-5.0/+5.0 |
| CQZS |
SHAFT SLOT DEPTH |
0.0320 INCHES NOMINAL SINGLE SHAFT |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AJST |
ROTOR INPUT CURRENT RATING |
NOT RATED |