| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
16.00 MINIMUM AND 20.00 MAXIMUM |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
2.203 ROTOR TO STATOR NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
8.000 INPUT TO OUTPUT NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| ABPA |
UNDERCUT DIAMETER |
0.6870 INCHES NOMINAL |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
830.00 MINIMUM AND 940.00 MAXIMUM |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
444.00 MINIMUM AND 570.00 MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-20708 SPECIFICATION |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AJSL |
BODY SIZE |
8 |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
25.00 OUTPUT |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2400 INCHES MAXIMUM |
| AJSP |
STATOR INPUT CURRENT RATING |
23.0 MILLIAMPERES MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.0898 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| ABKK |
FLANGE DIAMETER |
0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| ABXF |
SHAFT LENGTH |
0.3520 INCHES NOMINAL SINGLE SHAFT |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/79 GOVERNMENT SPECIFICATION |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
44.0 MILLIWATTS NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
10.0 DEG CELSIUS |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0/+7.0 |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
76.00 MINIMUM AND 81.00 MAXIMUM |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.040 INCH-OUNCES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.5920 INCHES NOMINAL |