| AJSL |
BODY SIZE |
15 |
| AJSY |
ZSO RESISTANCE IN OHMS |
65.00 NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
10.2 NOMINAL |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJSW |
ZRO RESISTANCE IN OHMS |
421.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
1.3120 INCHES NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
2.203 ROTOR TO STATOR NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0210 INCHES MINIMUM SINGLE SHAFT AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
5.600 INPUT TO OUTPUT NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.5910 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| ABHP |
OVERALL LENGTH |
2.1310 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
60.0 MILLIWATTS MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
2020.00 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| CRHN |
SHAFT SLOT WIDTH |
0.0210 INCHES MINIMUM SINGLE SHAFT AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.8750 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| AJSP |
STATOR INPUT CURRENT RATING |
30.0 MILLIAMPERES MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
347.00 NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
40.00 |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-6.0/+6.0 |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5400 INCHES NOMINAL SINGLE SHAFT |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |