| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.5/+7.5 |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
9.00 CENTIMETER-GRAMS MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.3750 INCHES NOMINAL SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJSW |
ZRO RESISTANCE IN OHMS |
800.00 NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES NOMINAL SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
50.0 MILLIWATTS NOMINAL |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
2900.00 NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0630 INCHES NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
115.00 NOMINAL |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
3.00 CENTIMETER-GRAMS MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
470.00 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
9.000 INPUT TO OUTPUT NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
0.501 ROTOR TO STATOR NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
560.00 NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
1.7860 INCHES NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SOLDER STUD |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| ABPA |
UNDERCUT DIAMETER |
0.8370 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.6780 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AAVH |
SHOULDER DIAMETER |
0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0380 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2410 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.0880 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
100.00 NOMINAL |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.0500 INCHES MAXIMUM |
| AJVW |
ALIGNMENT HOLE QUANTITY |
3 |
| AJSP |
STATOR INPUT CURRENT RATING |
21.0 MILLIAMPERES NOMINAL |
| AJSL |
BODY SIZE |
10 |