| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
81.40 MINIMUM AND 84.60 MAXIMUM |
| AAFZ |
BODY MATERIAL |
ANY ACCEPTABLE |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
| ABWV |
SHAFT DIAMETER |
0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| TTQY |
TERMINAL TYPE AND QUANTITY |
1 WIRE LEAD |
| AJSL |
BODY SIZE |
2 |
| AJTN |
ZSS IMPEDANCE MAGNITUDE IN OHMS |
123.00 MINIMUM AND 138.00 MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
60.00 |
| ABKK |
FLANGE DIAMETER |
1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJSW |
ZRO RESISTANCE IN OHMS |
1402.00 MINIMUM AND 1643.00 MAXIMUM |
| CQWQ |
SHAFT THREAD LENGTH |
0.2320 INCHES NOMINAL SINGLE SHAFT |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
1.1000 INCHES NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
4.000 INPUT TO OUTPUT MINIMUM AND 5.500 INPUT TO OUTPUT MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| AJTP |
ZSS IMPEDANCE ANGLE IN DEG |
26.50 MINIMUM AND 31.50 MAXIMUM |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| AJST |
ROTOR INPUT CURRENT RATING |
85.0 MILLIAMPERES NOMINAL |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.2686 INCHES NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AEEE |
CONNECTOR MANUFACTURER CODE |
05209 |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
2.9356 INCHES NOMINAL |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.190 INCHES SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
0.783 ROTOR TO STATOR MINIMUM AND 2.785 ROTOR TO STATOR MAXIMUM |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES MINIMUM |
| AEEF |
CONNECTOR MANUFACTURER PART NUMBER |
5704 |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-6.0/+6.0 |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5400 INCHES NOMINAL SINGLE SHAFT |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.05 INCH-OUNCES MAXIMUM |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
32.00 OUTPUT |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
1.0 WATTS NOMINAL |