| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/8 GOVERNMENT SPECIFICATION |
| AJSL |
BODY SIZE |
11 |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.07 INCH-OUNCES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
REAR |
| AAVL |
PILOT DIAMETER |
0.6250 INCHES NOMINAL |
| AJTN |
ZSS IMPEDANCE MAGNITUDE IN OHMS |
6.00 MINIMUM AND 12.00 MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
19.00 |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1200 INCHES NOMINAL SINGLE SHAFT |
| AAVH |
SHOULDER DIAMETER |
1.0000 INCHES NOMINAL |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
200.00 MINIMUM AND 300.00 MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| CQWQ |
SHAFT THREAD LENGTH |
0.2530 INCHES NOMINAL SINGLE SHAFT |
| AJWG |
SHAFT MAXIMUM RADIAL PLAY |
0.0006 INCHES |
| AJST |
ROTOR INPUT CURRENT RATING |
130.0 MILLIAMPERES MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
4.000 INPUT TO OUTPUT NOMINAL |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| CSJY |
TRANSFORMATION RATIO |
0.454 ROTOR TO STATOR NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-20708 SPECIFICATION |
| ABXF |
SHAFT LENGTH |
0.5620 INCHES NOMINAL SINGLE SHAFT |
| CWXK |
SHAFT RADIAL PLAY DETERMINING WEIGHT |
8.0 OUNCES |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
340.0 MILLIWATTS NOMINAL |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AJWH |
SHAFT END PLAY |
0.0100 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.7940 INCHES NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.0620 INCHES NOMINAL |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| CWYF |
SHAFT END PLAY DETERMINING WEIGHT |
1.0 OUNCES |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| ABHP |
OVERALL LENGTH |
2.4180 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.190 INCHES SINGLE SHAFT |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
80.50 MINIMUM AND 84.00 MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
12.00 OUTPUT |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJTP |
ZSS IMPEDANCE ANGLE IN DEG |
18.00 MINIMUM AND 30.00 MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0/+7.0 |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |