| AJSL |
BODY SIZE |
11 |
| AJSY |
ZSO RESISTANCE IN OHMS |
11.30 NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0220 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
900.0 ALLQJAA3.500 MICROWATTS |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
4.0 CENTIMETER-GRAMS MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
55973-5160113 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AJTA |
ZRS RESISTANCE IN OHMS |
556.00 NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| AJST |
ROTOR INPUT CURRENT RATING |
54.0 MILLIAMPERES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.4850 INCHES MINIMUM SINGLE SHAFT AND 0.5150 INCHES MAXIMUM SINGLE SHAFT |
| CWXK |
SHAFT RADIAL PLAY DETERMINING WEIGHT |
4.0 OUNCES |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
2430.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| AJWG |
SHAFT MAXIMUM RADIAL PLAY |
0.0005 INCHES |
| AJWR |
SHOULDER LENGTH |
0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| AJWH |
SHAFT END PLAY |
0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJSW |
ZRO RESISTANCE IN OHMS |
392.00 NOMINAL |
| CRHN |
SHAFT SLOT WIDTH |
0.0220 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
5.300 INPUT TO OUTPUT MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| CSJY |
TRANSFORMATION RATIO |
0.158 STATOR TO ROTOR NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
230.00 NOMINAL |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
50.30 NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.6000 INCHES MAXIMUM |
| AJXB |
SHAFT MAXIMUM RUNOUT |
0.0010 INCHES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
9.70 NOMINAL |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
4400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AAVH |
SHOULDER DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
30.00 OUTPUT |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJWE |
SHAFT RADIAL PLAY TEST POINT |
0.125 INCHES NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| CWYF |
SHAFT END PLAY DETERMINING WEIGHT |
8.0 OUNCES |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0/+7.0 |
| ABHP |
OVERALL LENGTH |
2.1150 INCHES MAXIMUM |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
210.00 NOMINAL |