| ANNR |
SURFACE TREATMENT AND LOCATION |
ENAMEL, DULL GRAY, METALLIC CASE |
| CCFF |
TERMINAL TYPE AND QUANTITY |
2 CONNECTOR, RECEPTACLE AND 2 TAB SOLDER LUG |
| ABNC |
FLAT HEIGHT |
0.188 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.312 INCHES NOMINAL |
| CCDP |
DELAY TIME PER STEP |
70.000 NANOSECONDS NOMINAL |
| ATPC |
STEP QUANTITY |
10 |
| BZWM |
SIGNAL DELAY METHOD |
LUMPED CONSTANT |
| ACZU |
ADJUSTMENT DEVICE DRIVE TYPE |
SHAFT |
| ABHP |
OVERALL LENGTH |
4.250 INCHES NOMINAL |
| ARBR |
BODY DEPTH |
2.250 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| FEAT |
SPECIAL FEATURES |
FINE CONTROL 11 EQUAL INCREMENTS 0/0.7 MICROSECOND EACH |
| CCDX |
PULSE RISE TIME RATING |
400.0 NANOSECONDS |
| ACZB |
FREQUENCY RATING |
NOT RATED |
| ADAT |
BODY WIDTH |
3.500 INCHES NOMINAL |
| BHTH |
ATTENUATION IN DECIBELS |
4.000 |
| ANSR |
OUTPUT IMPEDANCE RATING |
500.000 OHMS |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
1 |
| AMSE |
VOLTAGE RATING |
NOT RATED |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| CCDQ |
SECTION DELAY TIME |
7.000 MICROSECONDS 1ST PRIMARY NANOAMPERES |
| ABXQ |
FLATTED PORTION LENGTH |
0.312 INCHES NOMINAL |
| AFGA |
OPERATING TEMP RANGE |
+0.0/+75.0 DEG CELSIUS |
| ADAQ |
BODY LENGTH |
3.250 INCHES NOMINAL |
| CCDT |
DELAY TIME VARIATION PER DEG CELSIUS |
NOT RATED |
| AFDS |
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS |
3.750 INCHES NOMINAL |
| ANSL |
INPUT IMPEDANCE RATING |
500.000 OHMS |
| AFDV |
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS |
1.750 INCHES NOMINAL |
| AKPV |
MOUNTING FACILITY QUANTITY |
4 |
| ANNQ |
MATERIAL AND LOCATION |
STEEL CASE |
| AAUB |
HOLE DIAMETER |
0.188 INCHES NOMINAL |
| ACZT |
ADJUSTMENT DEVICE QUANTITY |
2 |
| BBBW |
MOUNTING PROVISION ARRANGEMENT STYLE |
FOUR POSITION RECTANGULAR |
| APQL |
FREQUENCY BANDWIDTH |
900.0 KILOHERTZ NOMINAL |
| CCDN |
DELAY TIME VARIATION METHOD |
ADJUSTABLE |
| AAQL |
BODY STYLE |
RECTANGULAR, BRACKETED |
| ZZZV |
FSC APPLICATION DATA |
RADAR NONAIRBORNE EXCEPT FIRE CONTROL AND GUIDED MISSILE |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |